Attention!!! PVC pipe production line is here!

Views: 607 Author: Site Editor Publish Time: Origin: Site

The PVC pipe production line consists of a conical twin-screw extruder, a vacuum setting box, a tractor, a cutting machine, a turning frame and so on. The extruder and traction machine adopt frequency conversion speed regulation device. The traction machine has two-claw, three-claw, four-claw, six-claw, and eight-claw traction methods. Optional saw blade or planetary cutting type, plus a length gauge and thickening device. PVC pipe production line has the characteristics of beautiful appearance, stable performance and convenient operation. With corresponding molds, it is possible to produce plastic PVC pipes of various diameters and wall thicknesses, such as PVC threading pipes, water supply and drainage pipes, silencer drainage pipes, and communication porous pipes.


PVC Pipe Production Line

 

Jiangsu Xinrongplas Machinery has full range of PVC pipe extrusion line, including four cavity pipe extrusion line, double cavity pipe extrusion line and large diameter pipe extrusion line. Our company will also provide basic formula for PVC pipe production, customer can adjust easily based on the formula. We manufacture machines for production of different PVC pipes, including U-PVC, C-PVC, M-PVC, PVC-O pipes, etc.

 

Our PVC pipe extrusion line can produce from size of minimum 16mm to 1000mm with single layer or multi-layer.

 

Jiangsu Xinrongplas Machinery Co., Ltd was founded in year 1996. With continuous focusing on plastic extrusion machinery, we have gained a certain awareness as one of professional PVC double pipe making machine manufacturers.

 

Our main products are: plastic pipe extrusion line, plastic profile extrusion line, plastic sheet extrusion line and plastic recycling machine.


We have provided turnkey project for more than 80 countries all over the world. After many years' development, now our company has modern workshop more than 50,000m².

 

With more than 12 after sale engineers, everyone is after systematic learning and training. As we know the after-sale service is the most important part of the turnkey project, our engineer can reach to your workshop within 72 hours all over the world.

 

We know the quality is the life of our company. Our company insists to manufacture all machine units by ourselves in order to control quality strictly by our quality inspectors. To implement this concept, we have built our own tooling and CNC workshop. Even if some parts from our certified supplier, our quality inspector will check these parts before entering our warehouse. Warmly welcome to visit our workshop, and sincerely hope we can have long term cooperation in near future!


×

Contact Us