Correct maintenance can make better using of PVC pipe production line

The correct using of the PVC pipe production line can avoid threats to the operator's personal safety, avoid equipment problems, and can better using the PVC pipe production line to bring greater benefits to users.

1. PVC pipe production line factory’s production line when installing, debugging (molding, adjusting blade gap) or disassembling molds, it must be carried out by personnel familiar with the machine in accordance with the prescribed procedures. The sharpness of the blade and die edge should be checked regularly. If the edge is found to be dull, it should be sharpened or replaced in time. Be sure to stop the machine when changing the mold to avoid danger.

2. PVC pipe production line When the factory’s PVC pipe production line is in normal work, do not put your hands or part of the body between the upper and lower molds (blades), and do not put all sundries and tools on the workbench to avoid accidents. Since the PVC pipe production line can be operated by multiple people, there must be someone responsible for directing the production.

3. During operation, be careful when holding the workpiece and waiting for the slide to descend. The gap between the cutting blade and the die and the bending radius must be selected according to the thickness of the copper bar (or aluminum bar).

4. Keep the oil clean and the oil path unblocked, and lubricate the moving parts of each unit every shift. Electrical and hydraulic components must be flexible in movement and correct in position. If abnormalities are found, they must be stopped for inspection immediately.

5. In order to improve the service life of the PVC pipe production line, it is generally required to avoid direct sunlight and other heat radiation, and to avoid places with too much humidity, excessive dust or corrosive gas. Corrosive gases can easily cause electronic components to be corroded and deteriorated, causing poor contact or short circuits between components, affecting the normal operation of the equipment. The precision PVC pipe production line should be far away from equipment with high vibration, such as punches, forging equipment, etc.

6. In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, the PVC pipe production line generally adopts dedicated power supply (for example, it is divided from the low-voltage power distribution room to be used separately for CNC machine tools) or a voltage regulator device is added And so on, can reduce the impact of power supply quality and electrical interference.

7. Safety The operating procedures are one of the important measures to ensure the safe operation of the PVC pipe production line. The operator must follow the operating procedures. When a failure occurs, the operator should pay attention to keeping the site, and truthfully explain the situation before and after the failure to the maintenance personnel, so as to facilitate the analysis and diagnosis of the cause of the failure, and eliminate it in time.

8. The PVC pipe production line should not be sealed for a long time. After purchasing the PVC pipe production line, make full use, especially in the first year of use, so that the weak links that are prone to failure can be exposed as soon as possible and can be eliminated during the warranty period. When there is no processing task, the PVC pipe production line should also be energized regularly, preferably 1-2 times a week, and run dry for about 1 hour each time, in order to use its own heat to reduce the humidity in the machine, so that the electronic components are not damaged. In case of damp, it can also find out whether there is a battery alarm in time to prevent the loss of system software and parameters.

Our company is professional in producing plastic pipe production lines. If necessary, you can consult relevant content at any time and look forward to our cooperation.