You are here:

Composition of Singe Screw Extruder

The most basic and versatile of an extruder is the single screw extruder. It mainly includes six parts: transmission, feeding device, material barrel, screw, machine head, and extrusion die head&mould.

Read More »

Features of tape winding RTP pipe

Features of tape winding RTP pipe

Read More »

Introduction of the differences between PVC and PE pipes

The differences between PVC pipes and PE pipes include: 1. raw materials, 2. performance, 3. toughness, 4. thermal conductivity.

Read More »

Disassembly method of single screw extruder screw

The plastic extruder is equipped with a barrel, in which screws are installed. There is a reduction gearbox at the rear of the barrel. and a screw sleeve is installed in the gearbox.

Read More »

Connection methods for PE double wall corrugated pipes

A method of connecting PE double wall corrugated pipes by making one end a socket and the other end a socket. There are two methods for forming sockets on double wall corrugated pipes: The expansion molding method involves first forming a double wall corrugated pipe, then heating one end locally and expanding it into a socket. The advantage of this method is that the socket part is a structural wall, with good stiffness and reliable connection.

Read More »

Differences and Characteristics of Single and Twin Screw Extruders

Differences and Characteristics of Single and Twin Screw Extruders

Read More »

Xinrongplas Attend Chinaplas 2023 International Rubber and Plastic Exhibition

The annual "CHINAPLAS 2023 International Rubber and Plastic Exhibition (Chinaplas Exhibition)" is a large exhibition in the plastic and rubber industry in Asia,

Read More »

Brief Introduction of Pipe Calibrating Method

After the pipe is extruded from the sizing sleeve, the temperature is still very high. In order to ensure the accuracy requirements of pipeline size and shape, as well as good surface work quality, it is necessary to take measures such as cooling and sizing sleeves.

Read More »

PE315-800mm Pipe Extrusion Line Testing

Jiangsu Xinrongplas machinery Co., Ltd was founded in 1996, majored in all kinds of plastic pipe machine filed for more than 26 years. For PE pipe, our machine can produce diameter range from 16 to 2000mm. We have one set PE315-800mm pipe machine test for our customer this week.

Read More »

Four Kinds of Heaters Commonly Used in Plastic Extruders

Four kinds of heaters are often used in plastic extruders. Here is a brief introduction to their working principles, advantages and disadvantages.

Read More »

PVC160mm Pipe Extrusion Line Testing

PVC160mm Pipe Extrusion Line Testing

Read More »
×

Contact Us