Jiangsu Xinrongplas machinery Co., Ltd. was founded in 1996,majored in all kinds of plastic pipe machine filed for 28 years. For PVC pipe machine we make diameter range from 16-1000mm. We have one set PVC50-250mm high speed pipe machine test for our customer this week.
Read More »Product introduction: The barrel and screw adopt a "building block" structure, with a fully engaged screw and strong self-cleaning performance.
Read More »According to the rotation direction of the twin screw, the extruder can be divided into two forms: Co-rotating extruder and Counter-Rotating. Co-rotating extruder: Refers to the two screws rotating in the same direction when working, while counter rotating extruder: Refers to the two screws rotating in opposite directions when working.
Read More »The difference between parallel and conical twin-screw extruders:
Read More »Common Fault Causes and Handling Methods for PVC Profile Extrusion Lines
Read More »The most basic and versatile of an extruder is the single screw extruder. It mainly includes six parts: transmission, feeding device, material barrel, screw, machine head, and extrusion die head&mould.
Read More »The differences between PVC pipes and PE pipes include: 1. raw materials, 2. performance, 3. toughness, 4. thermal conductivity.
Read More »The plastic extruder is equipped with a barrel, in which screws are installed. There is a reduction gearbox at the rear of the barrel. and a screw sleeve is installed in the gearbox.
Read More »A method of connecting PE double wall corrugated pipes by making one end a socket and the other end a socket. There are two methods for forming sockets on double wall corrugated pipes: The expansion molding method involves first forming a double wall corrugated pipe, then heating one end locally and expanding it into a socket. The advantage of this method is that the socket part is a structural wall, with good stiffness and reliable connection.
Read More »